Plastic Tubing
Plastic tubing of various lengths and bores constructed of materials suitable for general laboratory, biopharmaceutical, food and beverage, medical, vacuum, low-pressure, high-pressure, cleanroom or environmental applications. Products may be chemical- or corrosion-resistant. Formulated for resistance to flex fatigue and abrasion, plastic tubing is more flexible and less permeable than rubber tubing.
How Is Plastic Tubing Used?
Flexible plastic tubing may be used as transfer lines for contamination fluid control, hydraulics, protective jacketing, vacuum pump and diaphragm pump feeds and discharges, refrigeration, water and fluid lines, food and beverage, instrumentation, research laboratories, agriculture, material handling, air and gas lines, chemical lines and pharmaceuticals.
Types of Plastic Tubing:
• PVC: lightweight and flexible, will retain its bore on bending and can be sterilized up to 121°C
• Silicone: ideal where a hard-wearing material is needed, including transfer of liquids or higher temperature environments
• LDPE: good for general low pressure and temperature, instrumentation, corrosive atmosphere, and food processing
• PTFE: has excellent chemical-resistant and temperature-resistant properties
• PE: flexible, lightweight, durable, and corrosion resistant, used for a wide range of liquid, gas, and fluid transfer applications
• FEP: clear, small-diameter tubing, the economical choice for chemical resistance and broad temperature exposure
• PEEK: high-performance polymer with mechanical and chemical resistance, and highly resistant to thermal degradation
Accuflow Systems Saint-Gobain Tygon Microbore Tubing, Non-DEHP, 0.010 in ID, 500 ft
Tygon ND 100-80 microbore tubing is a non-DEHP medical-grade thermoplastic designed for precise microfluidic and medical device fluid transfer. It offers Class VI biocompatibility and a higher durometer for improved pressure resistance at very small diameters.
- Non-DEHP medical thermoplastic
- 0.010 in ID x 0.030 in OD, 0.010 in wall (0.25 mm x 0.75 mm, 0.25 mm)
- Packaged length 500 ft (150 m)
- Meets USP <88> Biological Test for Plastics, Class VI (fluid path)
- Suitable for drainage systems, diagnostic equipment, and pressurized fluid transfer
- Microbore size compatible with peristaltic pumps and analytical instrumentation
MSC Value Collection Extension Spring, 17/32 in OD, 5-1/4 in Free Length, Steel
This extension spring provides reliable tension for various mechanical applications. It is engineered from durable steel, ensuring longevity and consistent performance, and is part of a collection designed to offer quality at a great value.
- Constructed from steel for durability and reliable performance.
- Features a 17/32 in outer diameter for specific fitments.
- Designed with a 5-1/4 in free length.
- Suitable for a range of uses requiring tension.
AVANTOR MASTERFLEX (VWR LLC) Masterflex I/P High-Performance Precision Pump Tubing, Norprene Food, I/P 88; 25 ft
Masterflex Norprene Food High-Performance Precision pump tubing is formulated to withstand extreme temperatures and will not deteriorate in demanding food and beverage applications. This tubing is compatible with virtually all commercial clears and sanitizers and can be sterilized via autoclave without impacted overall service life. Ideal for food and beverage applications, this tubing complies with FDA, NSF, and 3-A standards.
Microsolv Technology Corporation Tubing Holder, Knee, 180 Degree Turn. Blue. 10/PK.
This Tubing Holder, will keep your tubing "in place" when making a 180⁰ turn, which is not always easy. Avoid clutter and keep your system optimized. These tubing knees will give you the right bend of your PEEK tubing, preventing close diameters, which do have a negative effect on the mechanical stability of your PEEK tubing and can cause poor internal dimensions.Best performance when used with 1/16th" PEEK Tubing but other tubing can be used as well.
AVANTOR MASTERFLEX (VWR LLC) Low-Density Polyethylene (LDPE) Tubing, 0.17"" x 1/4"", 100 ft/bag
Applications: General low pressure and temperature, instrumentation, corrosive atmosphere, and food processing applications. Characteristics: Broad chemical, solvent, and corrosive atmosphere resistance with good dimensional stability. Translucent. Certification: FDA-compliant (21 CFR 177.1520); meets USDA requirements Temperature range: ¿100 to 175¿F (¿73 to 80¿C) Sterilize: Ethylene oxide.
Molex-Polymicro Capillary 150UMx363UM 50M Reel
TSP150375 Flexible Fused Silica Capillary Tubing with Polyimide Coating: 150um ID x 363um OD, spool length of 50m.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, Polyimide, 0.0360"" ID x 0.0400"" OD, 12""L; 5/PK
The tubing is ideal for use as an electrical and thermal insulator, for fluid and gas delivery, or as a tough sheath for glass fibers. It offers excellent chemical, heat, radiation, and abrasion resistance and high dielectric strength. Resin meets USP Class VI requirements and NEMA standards. The tube has a temperature range of -418 to 896¿F (¿250 to 480¿C). Can be sterilized with autoclave, ethylene oxide or gamma irradiation.
AVANTOR MASTERFLEX (VWR LLC) Masterflex Transfer Tubing, DEHP-Free Flexible PVC, 1/8"" ID x 3/16"" OD; 50 ft
Applications: Analytical instruments, general laboratory. Use for transfer of liquids, gases, and inorganic chemicals found in lab, paint, pigment, and soap dispensing applications. Characteristics:Nontoxic DEHP-free formulation. Flexible, small bend radii. Transparent; allows for visual inspection and flow monitoring. Certifications: FDA compliant, Proposition 65, REACH Temperature range: -58 to 165¿F (-50 to 73¿C) Sterilize: Autoclave.
MSC Imperial Swivel Handle Tube Bender, 1/4 in O.D. Tubing, 180 Degree Bends
This swivel handle tube bender is designed for precision bending of 1/4 in O.D. tubing. Its unique swivel handle mechanism allows for repositioning mid-bend, enabling effortless fabrication of smooth, tight radius bends up to 180 degrees while reducing effort, improving control, and preventing handle crossing.
- Swivel handle repositions for leverage during bends.
- Fabricates smooth, 180-degree bends with reduced effort.
- Eliminates handle crossing.
- Designed for 1/4 in O.D. tubing; each tool bends one size.
- Open-side design slips over tubing at any point.
- Prevents marking or flattening of tubing.
- Suitable for steel, stainless steel, copper, aluminum, and other metal tubing.
- Conforms to Federal Specification GGG-B-191a Type III, Class 2.
- Calibrated to show bend angle.
Accuflow Systems Altafluor 400 PFA - available in coiled hose and convoluted tubing constructions - 400 PFA 3/16" X 1/4" - 25 FT
Altafluor 400 PFA (Perfluoroalkoxy) is the product of choice for applications involveing extreme chemical resistance combined with high temperature. Altifluor 400 is made exclusively from 100% virgin grade high performance resin used to resist stress cracking. The highest molecular weight resins available giving it superior physical properties making it suitable for even the most demanding applications. Chemically inert to nearly all industrial chemicals and solvents. It has a higher thermal stability than FEP. is translucent in appearance. It is FDA compliant for food contact, FDA 21 CFR 177.1550. It meets the requirements of USP Class VI, is non-flammable and has a moisture absorption of nearly zero. Altafluor is compatible with flare of conventional fittings.
MSC Checkers Wheel Chock, Polyurethane, 11-1/2 in. OAL, 50,000 lb Load Capacity
The general-purpose UC1500-4.5 wheel chock is manufactured with highly durable, lightweight polyurethane. It is designed for use with over-the-road trucks, trailers, pickups, and utility vehicles, rated for vehicles with tire sizes up to 46 in. diameter and a gross operating weight up to 50,000 lb.
- Highly durable, lightweight polyurethane construction.
- Third-party tested and certified.
- Ideal for over-the-road trucks, trailers, pickups, and utility vehicles.
- Rated for tire diameters 32 in. to 46 in.
- Rated for gross vehicle operating weight up to 50,000 lb.
- Resistant to oils, fuels, solvents, and other chemicals.
- Recessed carrying handle.
- Mounting hole for ropes, chains, or brackets.
- High-visibility orange color.
MSC Lift-All Web Sling, Type 3, Polyester, 8 ft, 1600 lb
The Flat Eye & Eye, Type 3 Web Sling is engineered for various lifting applications. Constructed from durable polyester, this sling offers an 8 ft length and a vertical capacity of 1600 lb. Its design incorporates abrasion-resistant features and complies with industry standards including WSTDA, ASME B30.9, and OSHA 1910.184.
- Flat eye & eye, type 3 configuration
- Polyester material
- 8 ft length
- 1 in width
- 1600 lb vertical capacity
- 1280 lb choker capacity
- 3200 lb basket capacity
- 1 ply construction
- 9 in eye length
- Yellow color
- Maximum operating temperature of 200 °F
- Abrasion-resistant
- Meets WSTDA, ASME B30.9, and OSHA 1910.184 standards
